欢迎光临山东大黄蜂移动碎石机租赁出租公司

热门关键词:

  • 移动碎石机租赁
  • 圆锥碎石机租赁
  • 反击破碎机租赁
当前位置: 首页 - 新闻中心 >
新闻中心
山东大黄蜂工程机械有限公司
电    话:18366127778
地    址:济南市槐荫区经一路273号群盛华城2号楼1-404
网    址:http://www.dhfjx.cn
新闻中心
圆锥式破碎机正常工作时需要注意事项?
网址:http://www.dhfjx.cn    发布时间:2021-07-15
很多使用者一定会觉得这个只要会用就行了,没什么可担心的。正是因为这样很多人都忽略一些重要的细节。忽略这些细节可能会给您带来不必要的麻烦。所以我在使用圆锥破碎机时必须要做到以下几点:
Many users will definitely feel that as long as they can use it, there is nothing to worry about. Because of this, many people ignore some important details. Ignoring these details may cause you unnecessary trouble. So when I use the cone crusher, I must do the following:
1.要注意圆锥式破碎机入料粒度和大小
1. Pay attention to the feed size and size of cone crusher
入料度大,产品粒度粗,选特粗型或粗型,反之则用中型和细型。在计算入料粒度时,是用开边大进料口尺寸乘以0.85作为选择入料的尺寸依据,而产品的平均尺寸是大入料除以破碎比。
If the feeding degree is large and the particle size of the product is coarse, select extra coarse or coarse type, otherwise use medium and fine type. In the calculation of feed size, the size of large feed port with open edge multiplied by 0.85 is used as the basis for selecting feed size, and the average size of product is large feed divided by crushing ratio.
                                    移动碎石机租赁
2.注意圆锥破衬板
2. Pay attention to the broken liner
软物料选长衬板,硬物料选短衬板,进料粒度的分布上,一般来说,小于闭口边排料口的物料如果超过10%,功耗上升,产品粒度则变成片状。粘性物料的含水份量的增加都能影响物料的通过量,就物料的水份来说,一般不超过5%。
Generally speaking, if more than 10% of the material is smaller than the closed side outlet, the product size will become flaky if the power consumption increases. The increase of moisture content of viscous materials can affect the throughput of materials. Generally speaking, the moisture content of materials is less than 5%.
圆锥破碎机由于其使用环境恶劣,粉尘大,加之有些使用单位维护不到位,往往在运行中出现各种各样的问题,一般来说,圆锥破碎机在使用操作中应注意以下问题,才能保证机器正常运转。
Cone crusher because of its bad environment, dust, and some use of the unit maintenance is not in place, often appear in the operation of a variety of problems, generally speaking, cone crusher in use and operation should pay attention to the following problems, in order to ensure the normal operation of the machine.
3.注意给料
3. Pay attention to feeding
给料不均就会出现生产能力降低,产品粒度过大,弹簧动作频繁,碗形轴承压力大,功耗上升。要有除铁装置,防止破碎腔过铁,如果频繁过铁,则可能引起断轴事故。
If the feeding is not uniform, the production capacity will be reduced, the product size will be too large, the spring will act frequently, the pressure of bowl bearing will be high, and the power consumption will be increased. There should be iron removal device to prevent the crushing chamber from iron overload. If iron overload occurs frequently, the shaft may be broken.
上一条:圆锥碎石机租赁如何提高整机功能?        下一条:移动碎石机设备为什么会影响出料...

创新驱动发展,科技引领未来,诚信铸就品牌

地址:济南市槐荫区经一路273号群盛华城2号楼1-404  电话:18366127778

山东大黄蜂工程机械有限公司      流量分析: