欢迎光临济南大黄蜂工程机械有限公司

热门关键词:

  • 移动碎石机租赁
  • 圆锥碎石机租赁
  • 反击破碎机租赁
当前位置: 首页 - 新闻中心 >
山东大黄蜂工程机械有限公司
电    话:18366127778
地    址:济南市槐荫区经一路273号群盛华城2号楼1-404
网    址:http://www.dhfjx.cn
新闻中心
圆锥破碎机堵料原因接解决方案!
网址:http://www.dhfjx.cn    发布时间:2020-10-21
圆锥破碎机使用过程中操作不当可能会造成圆锥破碎机堵料。下面小编为大家分享一下常见的圆锥破碎机堵料的原因和解决方案。
Improper operation of cone crusher may cause blockage of cone crusher. The following small series for you to share the common cone crusher blocking reasons and solutions.
1、物料给料不当
1. Improper material feeding
给料不当主要有两个原因,一种是给料过多,造成圆锥破碎机堵料。另一种是物料性质不适合圆锥破碎机破碎。
There are two main reasons for improper feeding. One is that too much feeding causes blockage of cone crusher. The other is that the material properties are not suitable for cone crusher crushing.
解决方案:要按照圆锥破碎机的使用说明书操作,不要过载,也不要破碎不适合圆锥破碎机破碎的物料。
Solution: operate in accordance with the instruction manual of cone crusher. Do not overload or crush materials unsuitable for crushing.
2、物料不能被及时排出
2. Materials cannot be discharged in time
圆锥破碎机破碎腔中的物料如果不能被及时排出,会造成圆锥破碎机堵料。一种情况,排料口参数没有根据入料性质变化,使破碎后的物料不能通过排料口而滞留在破碎腔内,造成圆锥破碎机堵料。另一种情况是物料中混合的非破碎物尺寸太大,超过排料口参数,不能被排出。
If the materials in the crushing chamber of cone crusher can not be discharged in time, it will cause blockage of cone crusher. In one case, the parameters of the discharge port are not changed according to the feeding properties, so that the crushed materials can not pass through the discharge port and stay in the crushing chamber, resulting in the blockage of the cone crusher. The other is that the size of the non broken material mixed in the material is too large to be discharged beyond the discharge port parameters.
解决方案:入料口和排料口参数都要根据物料变化而及时调整。物料中混合的非破碎物不宜过多、尺寸过大,有需要的话应提前筛分一遍。
Solution: the parameters of inlet and outlet should be adjusted according to the change of material. If necessary, screening should be carried out in advance if necessary.
                                             移动碎石机租赁
3、圆锥破碎机电动机故障
3. Motor fault of cone crusher
圆锥破碎机电动机出现故障的话会在圆锥破碎机破碎时出现偷停,不能为设备破碎提供动力,造成圆锥破碎机堵料。
If the motor of the cone crusher breaks down, it will stop stealthily when the cone crusher is broken, which can not provide power for the equipment crushing and cause the cone crusher to block materials.
解决方案:日常设备检查维护要做好,每次换班前都应检查设备状况。有问题及时维修处理。
Solution: daily equipment inspection and maintenance should be done well, and the equipment condition should be checked before each shift. If there is any problem, repair and deal with it in time.
4、圆锥破碎机零部件磨损严重
4. The parts of cone crusher are seriously worn
圆锥破碎机的破碎壁和轧臼壁是圆锥破碎机的主要易损件。如果这两个零部件磨损严重的话,会造成物料破碎不均匀或无力破碎,造成物料过大,不能通过排料口,从而造成圆锥破碎机堵料现象。
The crushing wall and mortar rolling wall of cone crusher are the main vulnerable parts of cone crusher. If these two parts are seriously worn, the materials will be broken unevenly or unable to break, resulting in the material is too large to pass through the discharge port, thus causing the cone crusher blocking phenomenon.
解决方案:日常设备检查维护要做好,每次换班前都应检查设备状况。及时更换损坏的零部件。
Solution: daily equipment inspection and maintenance should be done well, and the equipment condition should be checked before each shift. Replace the damaged parts in time.
5、圆锥破碎机破碎腔内有杂物
5. There are impurities in the crushing cavity of cone crusher
圆锥破碎机破碎腔内有杂物没有及时清理的话,投入破碎腔内的物料会因为空间不足不能有效破碎。同时,杂物的存在还会影响物料的流通造成圆锥破碎机堵料。
If the debris in the crushing cavity of cone crusher is not cleaned in time, the materials put into the crushing cavity will not be effectively broken due to the lack of space. At the same time, the existence of debris will affect the flow of materials, resulting in cone crusher blocking.
上一条:移动破碎机的制造工艺你应该了解...        下一条:移动式碎石机多少钱一台?

创新驱动发展,科技引领未来,诚信铸就品牌

地址:济南市槐荫区经一路273号群盛华城2号楼1-404  电话:18366127778

山东大黄蜂工程机械有限公司      流量分析: