欢迎光临济南大黄蜂工程机械有限公司

热门关键词:

  • 移动碎石机租赁
  • 圆锥碎石机租赁
  • 反击破碎机租赁
当前位置: 首页 - 新闻中心 >
山东大黄蜂工程机械有限公司
电    话:18366127778
地    址:济南市槐荫区经一路273号群盛华城2号楼1-404
网    址:http://www.dhfjx.cn
新闻中心
反击破碎机哪些优势是万万不可忽视的呢?
网址:http://www.dhfjx.cn    发布时间:2020-03-24
反击式破碎机也叫回来休息,主要用于冶金、化工、建材、水电和其他材料处理,经常需要移动业务尤其是对公路、铁路、水电工程等流动性石料的工作,根据加工原材料的类型,不同的尺寸和成品材料的要求使用不同的配置形式。下面是对桑蒂破碎机五大优点的分析。
  The impact crusher is also called back to rest. It is mainly used for metallurgy, chemical industry, building materials, hydropower and other materials processing. It often needs mobile business, especially for the work of mobile stones such as roads, railways, hydropower projects, etc. different configuration forms are used according to the type of raw materials processed, different sizes and requirements of finished materials. The following is an analysis of the five advantages of Sandi crusher.
  1. 可有效处理含水率大的物料,防止破碎机堵塞
  1. It can effectively deal with materials with high moisture content and prevent the crusher from blocking
  当物料含水量过大时,可在冲击破碎机的进料溜槽和进料板上加装加热装置,防止物料粘接。底部筛板不需要配备冲击破碎机,有效防止堵塞。锤式破碎机不能用加热的方法来防止材料的粘接,而且必须配备底部筛板,增加了堵塞的可能性。
  When the moisture content of the material is too high, a heating device can be installed on the feeding chute and the feeding plate of the impact crusher to prevent the material from bonding. The bottom sieve plate does not need to be equipped with an impact crusher to effectively prevent clogging. Hammer crusher can't prevent material from sticking by heating, and must be equipped with bottom sieve plate, which increases the possibility of blocking.
  2. 本机适用于软性物料和高硬度物料的破碎
  2. This machine is suitable for crushing soft materials and high hardness materials
  冲击式破碎机的板锤结构采用机械夹紧结构牢牢固定在转子上,与转子一起转动时惯性矩大。与锤式破碎机(锤头处于悬挂状态)相比,冲击式破碎机转子具有更大的动量,更适应较硬物料的破碎,能耗更低。
  The plate hammer structure of the impact crusher is firmly fixed on the rotor with mechanical clamping structure, and the inertia moment is large when rotating with the rotor. Compared with the hammer crusher (the hammer is in suspension state), the impact crusher rotor has greater momentum, is more suitable for the crushing of harder materials, and has lower energy consumption.
移动碎石机租赁
  3.方便灵活调节出料粒度,调节范围广
  3. It is convenient and flexible to adjust the discharge particle size, with a wide range of adjustment
  冲击式破碎机可以通过多种方式调节出料粒度,如调节转子转速、冲击板间隙、研磨室间隙等。间隙调整可通过机械或液压方式进行,间隙调整可通过局部操作按钮或过程控制系统轻松完成。锤式破碎机只能通过改变底筛板来调整出料的大小。
  The impact crusher can adjust the discharge particle size in many ways, such as adjusting the rotor speed, impact plate clearance, grinding chamber clearance, etc. Clearance adjustment can be carried out mechanically or hydraulically. Clearance adjustment can be easily completed by local operation button or process control system. Hammer crusher can only adjust the size of discharge by changing the bottom sieve plate.
  4. 易损件磨损比锤式破碎机小,金属利用率高
  4. Wear of vulnerable parts is smaller than that of hammer crusher, and metal utilization rate is high
  冲击式破碎机板锤的磨损仅出现在面对物料的一侧。当转子转速正常时,进给将落在板锤表面(冲击面),板锤背面和侧面未磨损。这种材料的面几乎没有磨损。而底部的磨棒也很容易更换。反击式破碎机板锤的金属利用率可达45% - 48%。然而,锤式破碎机锤头处于悬挂状态,磨损发生在顶部、前部、后部和侧面。与板锤相比,锤头磨损更严重,金属利用率仅为25%左右。身体本身也可以磨损。锤式破碎机底部筛板磨损严重。
  The wear of plate hammer of impact crusher only appears on the side facing the material. When the rotor speed is normal, the feed will fall on the hammer surface (impact surface), and the back and side of the hammer are not worn. There is little wear on the surface of this material. The grinding bar at the bottom is also easy to replace. The utilization rate of metal in plate hammer of impact crusher can reach 45% - 48%. However, the hammer head of hammer crusher is in suspension state, and the wear occurs at the top, front, rear and side. Compared with plate hammer, the wear of hammer head is more serious, and the utilization rate of metal is only about 25%. The body itself can wear. The bottom sieve plate of hammer crusher is seriously worn.
  5. 易于更换备件,降低维修成本
  5. Easy to replace spare parts and reduce maintenance cost
  冲击式破碎机的转子上只安装了6个板锤。用专用工具代替板锤,使用方便。更换一套板锤只需要一个班。更换底部磨室的磨棒仅需几十分钟,大大减少了维护维修的时间和成本。而锤式破碎机的锤头更多可达100多个,更换一套锤头需要花费大量的时间和人力,维护和保养费用较高。底部筛板更换也非常麻烦。
  Only six plate hammers are installed on the rotor of the impact crusher. It is convenient to use special tools instead of plate hammers. Only one shift is needed to replace a set of plate hammers. It only takes tens of minutes to replace the grinding rod in the bottom grinding chamber, which greatly reduces the maintenance time and cost. The hammer crusher has more than 100 hammerheads at most. It takes a lot of time and manpower to replace a set of hammerheads, and the cost of maintenance is high. The replacement of the bottom sieve plate is also very troublesome.
  以上就是移动碎石机租赁对反击破碎机优势的详细介绍,想要了解更多请点击官网http://www.dhfjx.cn
  The above is a detailed introduction of the advantages of mobile crusher leasing to counter crusher. To learn more, please click http://www.dhfjx.cn
上一条:降低圆锥碎石机能耗措施的都有哪...        下一条:移动碎石机租赁市场需求的稳定性...

创新驱动发展,科技引领未来,诚信铸就品牌

地址:济南市槐荫区经一路273号群盛华城2号楼1-404  电话:18366127778

山东大黄蜂工程机械有限公司      流量分析: