欢迎光临济南大黄蜂工程机械有限公司

热门关键词:

  • 移动碎石机租赁
  • 圆锥碎石机租赁
  • 反击破碎机租赁
当前位置: 首页 - 新闻中心 >
山东大黄蜂工程机械有限公司
电    话:18366127778
地    址:济南市槐荫区经一路273号群盛华城2号楼1-404
网    址:http://www.dhfjx.cn
新闻中心
如何降低破碎机板锤的消耗?
网址:http://www.dhfjx.cn    发布时间:2019-09-27
破碎机板锤是与物料直接接触的,所以板锤的消耗一直过大,板锤的主要损坏形式是松脱和断裂,而不是正常的磨损。针对此问题,移动碎石机租赁厂家在本文将介绍降低破碎机板锤消耗的应对措施。
The plate hammer of crusher is in direct contact with the material, so the consumption of the plate hammer has been too large. The main damage form of the plate hammer is loosening and breaking, not normal wear and tear. In order to solve this problem, the rental manufacturer of mobile gravel crusher will introduce the measures to reduce the consumption of plate hammer of crusher in this paper.
1、尽量使用质量好的板锤
1. Make the best use of the board hammer with good quality.
针对板锤的质量问题,嵩源实业建议选用原破碎机制造厂的板锤,基本达到了质量要求。
In view of the quality problem of plate hammer, Songyuan Industry suggested that the original crusher factory should be selected to meet the quality requirements.
2、重新制作螺栓模具
2. Re-manufacture of Bolt Mould
使螺栓的椭圆头与板锤螺孔接触面能良好接触,同时,将螺栓螺纹牙的厚度控制在尺寸允差内,螺纹的收尾加工出卸荷槽,以防应力集中而断裂。
The elliptical head of the bolt can be in good contact with the contact surface of the hole of the plate hammer. At the same time, the thickness of the thread teeth of the bolt is controlled within the allowable size. The unloading groove is processed at the end of the thread to prevent stress concentration and fracture.
移动碎石机租赁板锤
3、加强使用和维护管理
3. Strengthen the Management of Use and Maintenance
首先,板锤安装时,必须清除板锤螺栓孔及槽口的型砂及毛刺,使联接时贴合平实;其次,紧固板锤螺栓时,要边紧固边锤击椭圆头;再则,运行后约半小时要及时检查螺栓紧固情况,紧固后再将螺母与螺纹点焊以防松动。
First, when plate hammer is installed, the moulding sand and burrs of bolt holes and grooves of plate hammer must be cleared so as to make the connection fit smoothly; secondly, when fastening plate hammer bolts, the elliptical head should be hammered while fastening; thirdly, the bolt tightening situation should be checked in time about half an hour after operation, and then the nut and thread should be spot welded after tightening to prevent loosening.
4、喂料时物料要符合设备要求
4. Material should meet equipment requirements when feeding
操作人员在进行喂料前,首先要仔细阅读该设备的破碎范围,因为不同的破碎机破碎的物料硬度不同,物料在进行破碎腔前应事先做一下处理措施,减少物料的粘性和含水量。这样才能使破碎机发挥到大性能。
Before feeding, operators should first read the crushing range of the equipment carefully, because different crushers have different hardness of crushed materials, materials should be treated beforehand before crushing chamber to reduce the viscous and moisture content of materials. Only in this way can the crusher give full play to its maximum performance.
今天给大家介绍的精彩内容到这里就结束了,小编在这里十分感谢大家的阅读,如果大家想要了解更多的相关咨询,可以把我们的网址:http://www.dhfjx.cn添加到收藏,或者搜索关键词:移动碎石机租赁,也可以找到我们。
Today's wonderful content for you is over. The edition is very grateful for your reading. If you want to know more about the relevant consultation, you can add our website: http://www.dhfjx.cn to the collection, or search the keyword: mobile lithotripter rental, you can also find us.
上一条:碎石机的内部构成组件有哪些?        下一条:反击破碎机在操作过程中出现故障...

创新驱动发展,科技引领未来,诚信铸就品牌

地址:济南市槐荫区经一路273号群盛华城2号楼1-404  电话:18366127778

CopyRight © 2018. 山东大黄蜂工程机械有限公司 All Rights Reserved.   技术支持: 济南诺商  
备案号:鲁ICP备17031054号-1  流量分析: