欢迎光临济南大黄蜂工程机械有限公司

热门关键词:

  • 移动碎石机租赁
  • 圆锥碎石机租赁
  • 反击破碎机租赁
当前位置: 首页 - 新闻中心 >
山东大黄蜂工程机械有限公司
电    话:18366127778
地    址:济南市槐荫区经一路273号群盛华城2号楼1-404
网    址:http://www.dhfjx.cn
新闻中心
颚式破碎机的破碎比越大就越好吗?
网址:http://www.dhfjx.cn    发布时间:2018-09-28
对于颚式破碎机的衡量来说,标准有很多,破碎比是其中之一,这一标准其实指的就是破碎前后粒度大小的比,是该机性能的一个重要的表现,那么对于该机来说,破碎比越大就越好吗?
For jaw crusher measurement, there are many standards, crushing ratio is one of them, this standard actually refers to the ratio of particle size before and after crushing, is an important performance of the machine, then for the machine, the greater the crushing ratio, the better?
颚式破碎机是一种粗破设备,虽然加工后的成品尺寸相对较大,但是对于破碎之前来说,要小很多,这两种尺寸的比就是我们所说的破碎比,它影响的是破碎效果,也就是说破碎比大的话破碎效果会比较好,但是这并不是说越大越好。
Jaw crusher is a kind of crushing equipment, although the finished product size is relatively large, but before crushing, much smaller, the ratio of these two sizes is what we call crushing ratio, it affects the crushing effect, that is to say, the crushing effect will be better if the crushing ratio is large, but this is not to say that the more crushing effect. The bigger the better.
对于颚式破碎机的生产来说,破碎比的大小不代表其能为生产带来效益的大小,比如说生产中要求的破碎比是3,但是你选择的机器的破碎比是5,虽然比要求的大,但是这表示加工的效果没有达到预期的要求,也就是说这一数值并不是越大越好,能不能满足生产的需要才是该机的选择标准。
移动碎石机租赁
For jaw crusher production, the size of the crushing ratio does not mean that it can bring benefits to production, such as the production requirements of the crushing ratio is 3, but you choose the crushing ratio of the machine is 5, although larger than the requirements, but this means that the processing effect did not meet the expected requirements, that is to say, this value. It is not the bigger the better, whether it can meet the needs of production is the choice standard of the aircraft.
当然了,对于一条生产流程来说,如果颚式破碎机的破碎比达不到要求的话,也就是说该机加工后的物料尺寸没有达到要求,那么就会加剧后续生产环节的压力,所以破碎比的选择是十分重要的。
Of course, for a production process, if the crushing ratio of jaw crusher can not meet the requirements, that is to say, the size of the material processed by the machine does not meet the requirements, then it will intensify the pressure of subsequent production links, so the choice of crushing ratio is very important.
选择的过大或者过小都不能满足生产的需要,另外选择过大的话,说明颚式破碎机性能更好,那么就需要更多的成本投入,而综合的收益是产出-成本,这个时候不仅成本大,而且产出不符合要求,所以生产的效益就会下降,这一点也说明破碎比并不是越大越好。
If the selection is too large or too small, it can not meet the needs of production. If the selection is too large, it shows that the jaw crusher has better performance, then more cost input is needed, and the comprehensive income is output-cost. At this time, not only the cost is high, but also the output does not meet the requirements, so the benefit of production will be reduced. It is also clear that broken ratio is not as big as possible.
本文主要介绍的是颚式破碎机的破碎比越大就越好吗?通过分析可以看出,答案是否定的,虽然破碎比是该机性能衡量的重要指标,但是鉴于生产需求决定了破碎比大小的选择,所以直接根据破碎比来选择设备是不对的,应该根据生产需要来进行选择。
This article mainly introduces the greater the crushing ratio of jaw crusher. It can be seen from the analysis that the answer is no, although the crushing ratio is an important indicator of the performance of the machine, but in view of the production demand determines the size of the crushing ratio of choice, so directly according to the crushing ratio to choose equipment is not right, should be based on production needs to choose.
上一条:圆锥破碎机要如何正确的保养?        下一条:你知道移动破碎机应该怎么运吗?

创新驱动发展,科技引领未来,诚信铸就品牌

地址:济南市槐荫区经一路273号群盛华城2号楼1-404  电话:18366127778

CopyRight © 2018. 山东大黄蜂工程机械有限公司 All Rights Reserved.   技术支持: 济南诺商  
备案号:鲁ICP备17031054号-1  流量分析: